Видео

Thank you so much. I'm trying to sell my 04 Colorado and it had the idling issue but after following this video it seems I've fixed that issue 😊

Great job....right to the point....some people tell you all about their life ...nice to watch a video and get to fixing!👍👍👍👊👊👊💯

Can this problem also cause a skip with acceleration and a p0300 code?

Thanks This is exactly my issue hopefully this works gonna try sea foam first though

Nice!

😊 thanks. I been having a on. Off problem with my 2007. 4 cylinder. Sometimes it wont idel an run ruff and try to stall. Driving me nuts lol

Excellent walk through!

I have a 2008 Colorado. I cleaned the throttle body and MAF sensor today. I did it with the battery still connected. Put everything back together as it was prior to me taking it all apart. The relearn procedure I tried several times, and it doesn’t work. I did the 45+mph accelerations and decelerations, and none of it works. Don’t want to have to spend $200 for someone with a scan tool to relearn the idle which takes one minute. I even tried disconnecting the battery, and that also does not work. I used the right products also. Everything was put back correctly. No check engine light codes either.

Unfortunately, we've tried replacing the spark plugs, ignition coils, and cleaning the TB, but our truck still idles fairly rough at low RPMs. We're going to try replacing the PCV hose, and then cleaning the MAF. Here's hoping one of those works, because I'm losing my mind with the truck. 🤬

Did you have any issues with fitment? Mine seems to be far too short for width. Looks like I have to fabricate some extension pieces to get it to fit

I just finished: Changing the plugs, Cleaning the Throttle Body, and Cleaning the Mass Air Flow Sensor, and my Rough Idle is Cured !!! Thank You and God Bless

Good Info! Thank you for sharing

What is the description/part # of the molded hose at 11:58 ? Mine is split and I can't find the part listed.

it worked!

Thanks worked good

I just acquired a 2004 chevy colorado with yhe 3.5 I5 cylinder, with only 92,000 miles on it. I have this very issue. Idles rough around 500 rpm and when throttling down, it dips below 500 and vibrates. Going to give this a shot. The truck still looks like the day it rolled off the lot, they took such great care of it. Really appreciate the video for the help. I also have a weird issue, I keep smelling a weird burning smell coming through the exhaust vents, off and on. Any idea on what it may be? Transmission is working fine, someone Said the torque converter, but the tranny is great in it.

Does it throw an engine code? If so what number

thanks for this video - I just did the same thing to my 2007 95000 miles and it fixed the bad idle 100 %

How was it to change over to battery cable ends

would that cause a misfire aswell

Tomorrow morning lm gonna desmadra my Colorado

Exactly what I needed to know thank you friend

This is definitely the best video for this fix thank you for this!

Finally no bs, a detailed video, thanks buddy

What would be the downfall of just getting a new TB instead of cleaning it?

Thank you

ive done rear pads before and ive never been able to get both rear caliper bolts out. thanks for the informative video!

*you standing over a dead body, hammer in hand* "just wanna give a lil love tap"

Thank you

My 08 Canyon has a light vibration while at idle. Will this help with that?

I did this and now my engine light is flashing and I still have throttle problems

Thanks for the video! I accidentally broke my hose but that was my fault... I have no clue how to replace it either does anyone know anything that will help me?

How do you adjust the parking brake

Thanks for the step by step video. Had the check engine light cleared and now it's running like a new truck.

As far as the removing of the throttle body, you don't have to. Try the seafoam top engine cleaner and lube.

Never worked on a vehicle with pads and shoes .thanks very informative

Great video he was thorough with his explanation

A pcm update helps too

Will it work too if it rough idles when you only have less quarter of tank filled

You don’t need to remove the throttle body. Just clean the throttle valve, it will save you some time.

Anybody else trying to fix P0106?

Thanks Dude. I needed a refresher on this. Rough idle issues are now gone!

This one is the best of these, as it actually shows the result. I did the same fix years ago to my H3, and now there is need for another cleaning as the surge is back. While the box is off, it is good to check the coil wires, as they can rub against the valve cover and ground blowing the fuse. No OBD-reader can tell what has happened, not even Tech2, as it blows the coil fuse. It took me a day to figure that out... At the same time one can also replace the spark plugs if they have more than 60000 miles on them.

hahahhhh...one-hander from the get...hold'n that camera and work'n that wrench like a boss...yeah bruh!

Project Corona....???? 🤔🤔🤔

What’s the name of the impact gun you are using you got it off amazon?

What size are the rotors 10 inch or 11 inch?

Thanks for the walk through. I did it exactly how you said to do it. Also changed my spark plugs while I was at it. Now my truck running smooth as silk. My wife and son both said it sounds like it's not going going to die/blow up now 😂.

Is it true you gota reprogram the throttle body ? I have a 2005 Chevy Colorado

Great vid!!